Within the Pergamon application there are two general ways of creating reports - Quick Reporting, and the more comprehensive Dynamic Reporting system.

The Quick Reporting system is the more accessible and probably the most commonly used way of creating reports. The Quick Reporting system comprises of a range of pre-set reports which may take one or two criteria fields automatically from a particular location where the report can be used.

The same report can be accessed from several different locations as long as the criteria on which it depends is available in that dialog of application location.

In order to start a Quick Report, select the [Report] toolbar icon to display all of the Quick Reports available in that location. Simply select the required report from the menu to start the report off and send it to either the screen, an attached printer, or in the case of more modern operating systems, to a file.

The Dynamic Reporting system is far more comprehensive and is not dependant on a particular parent dialog or location. The Dynamic Reports are only accessible from the main Reports manager menu. Dynamic Reports allow you to not only enter a range of different criteria, but also select the fields that you want to be included in the final output.

Most Dynamic Reports follow a similar format - each report consists of a two stage process: selection of reports criteria and required fields, and production of the report itself either to printer and/or a file.

The first stage is performed via a reports criteria dialog. Because each report is designed to produce reports based upon a different Pergamon area, the criteria dialog may be slightly different between each report. In most cases however, each criteria dialog can be sub-divided into three general areas:

A set of criteria fields are presented down the left hand side of each report dialog. These fields provide the ability to enter search parameters to narrow down the results that will be displayed in the report. In most cases, these fields will be free-text entry fields that can also contain wild-cards, drop-down lists and boolean checkboxes.

A list of fields accessible to the report is presented in a listbox down the right hand side of the dialog. Each field is accompanied by a checkbox. In order to include a field in the final report, ensure that the field is checked. Similarly, in order to remove a field from the final report ensure that the field is un-checked.

The display fields can be reordered by selecting the field in the list and keeping the mouse button depressed. Drag the field to the new order in the list that you require.

If you want to save changes to the displayed configuration long term, consider using the Template system, below.

The bottom of each report dialog contains two checkboxes that allow the user to specify where the report will be sent. These checkboxes allow the report to be sent to a CSV (command separated values) file, or to the printer, or to both.

Three command buttons provide the ability to abort the report dialog using the [Close] button, [Run] the report to its intended destination, or to display information about the report version using the [?] button.

The Dynamic Reporting system allows the use of templates - recorded sets of criteria which can be reloaded to speed up the generation of repeat reports.

If you wish to record a certain set of criteria and reporting format (selection and placement of fields), configure the criteria window as required then select [Templates] > [Save Template] from the bottom of the window. After requesting a description for the template, the template is saved into the database for later use.

If you would like a template loading into the report as soon as the report is started, save the template with the name 'Default'.

In order to recover a template, load the Dynamic Report window and then select [Templates] from the bottom of the window. All previously saved templates for this report are displayed in the menu. Select the required Template from the menu to load it into the criteria window.

In order to update a template with new criteria, load the Dynamic Report window and select the required template from the [Templates] menu, as above. Update the on-screen criteria with new selection and then reselect the [Templates] button and choose [Update current template].

In order to remove a template which is no longer required, load the Dynamic Report window and select the required template from the [Templates] menu, as above. Once the template is selected, reselect the [Templates] button and choose [Delete current template].

While the current template criteria are still displayed on-screen, the template is removed from the database.

Pergamon Wiki Home